When you are selecting Grundfos pumps in Hungary, you have to consider your purpose. This is because there are many pumps put there for various uses. If you are not clear on what type of pump that you want you will spend a long time on the selection process and get more confused by the minute. You can buy pumps that are cost effective. And the right pump for the right application will increase the life of the pump and the entire system. For this purpose the features and uses of some pumps are given below. They will help you make a decision regarding the types of pumps to use for a particular application.

Features Of Your Pump

The centrifugal pumps are the common types of pumps in Hungary. The different types of configurations are fire, end suction, chopper, grinder and magnetic. They appear with one or more impeller. The casing is generally volatile or diffuser type. The usual type is electric motor driven. There is the ANSI process pump. This is generally considered as an end suction pump. The frame of the pump will be mounted. This will be supplied with open impellers. You will notice that the manufacturers will sell dimensionally standard sizes. These pumps are usually available in many different materials and metals, for different corrosive services. Then there is the API process pump. These pumps meet the standards for hydro carbon, namely the API 610 standard. The main features are the closed impellers with wearing rings that are locked. They are mounted centerline so as to minimize thermal movement.

Uses Of The Pump

These Grundfos pumps have the following uses in Hungary. In the case of centrifugal pumps, all types of liquids can be pumped. They have the highest flow rates compared to the other pumps. They are able to handle all liquids from clean to dirty and even liquids with low viscosity. Although the liquids should not contain any air or vapors. They are especially useful for water and thin liquids with or in the absence of solids. But they are not useful to pump thick oil. They have high flow rate and no pulsations that could be found in other pumps.

The ANSI pumps are generally used to transfer and processing of applications in chemical plants, paper mills, refineries and food processing plants in Hungary. They are used to pump water and thin liquids. The API process pumps are used to transfer hydrocarbon and crude oil. So they are usually used in hydrocarbon processing plants.