If you live in an urban area you might not be too concerned about how to obtain well water. But many citizens living in Hungary are still known to be reliant on well water and the usage of water pumps to get water supply into their homes. In such conditions water supply takes place through an electromechanical system connecting the water source and your household water supply network.
The Importance Of Depth Of Water
Hungary is a country blessed with a good underground water table. Therefore many of its citizens do not have to worry too much of the ability to obtain water through a well. But in any case the water table would reside many feet below the ground surface, hence, the requirement of pumps. Also the type of pump required depends greatly on the depth of the water source. If the well is relatively shallow, not much effort would be required, and the pump would not need to use high amounts of force to transport the water.
Types Of Water Pumps Required
This type is used in shallow and deep wells but they are fixed above the well or at ground level. Water is drawn by means of suction force created by the impeller and diffuser of the pump. There are shallow water jet pumps as well as deep well jet pumps designed for various depths of wells. The leading range of Grundfos pumps offers an attractive variety of centrifugal jet pumps for designed to pump from varying depths of water. Many prefer not to use jet pumps as they need to be primed to ensure water is pumped without air getting in. But this range is self-priming, eliminating that complicated task. They are suitable to pump clean, non-viscous liquids free from solid particles and fibers. Therefore they are useful mainly for domestic and light agricultural use.
Being a pioneer in manufacturing all types of pumps, Grundfos pumps are also present in this category. Unlike jet pumps which act by lifting water up, this type pushes the water flow up. All varieties normally have a characteristic appearance of long cylindrical shape. It is comparatively time saving due to the lack of need to be primed, and allows continuous operation from time of installation. They are also capable of creating up to about 30% more pressure force than other types, therefore give a substantial energy saving. |
