Selecting A Well Pump In Hungary

The selection of a pumping device to be used in a well should be done with care. Many households and small to medium scale businesses in Hungary are known to use wells as their primary source of water. Therefore choosing the proper pumping device is crucial to ensure an uninterrupted flow of water. The purpose of a well pump is to move water from the well through a distance where is will be used. According to the mode of pumping action the following 3 types of well pumps can be identified.

• Centrifugal pump
• Jet pump
• Submersible pump

The size of the well is the first determining factor on the type of pump which is to be chosen. You may determine this by measuring the internal diameter of the well. If you are looking at purchasing a leading product such as Grundfos pump, you would be able to get assistance from any authorized dealer in Hungary and select a pump to suit the type of well. The pump specifications would include the size of the pump, injector type and cylinder.

A Grundfos pump would also be classified in terms of the distance required to be pumped. That is the pumping level is defined as the distance between the water level and the well pump. The pump should also be able to be placed close to the water source. Therefore the size of pump should be chosen accordingly. The discharge pressure is often a measurement which is defined for a pump. In most cases it is within the range of 30-50 lbs which is adequate for the average household use. The discharge capacity of the pump is also important to judge whether the water supply would be sufficient for the intended use.

Proper Care For Well Pumps

In order to get the best out of the pumping device you purchase, it is important to take proper care and maintain it as required. Also, well pumps tend to consume a fair amount of energy. For optimum consumption it is required that the pump functions properly and used within the limits specified by the manufacturer. If proper maintenance is not carried out in a timely manner it could lead to breakdown or even leak occurring in the pump causing higher energy consumption. The pressure tanks should be inspected to determine if the pup has reached waterlogged capacity.